Lianhe Lianhe

Polyester unit

Polyester unit

A global provider of technology and engineering solutions, with strong process engineering and R & D capabilities, as well as many years of industry experience, we provide customers with PET polyester, fiber and petrochemical industry solutions

vacuum drying

The quality performance and electrical automatic control technology developed and manufactured by the company have reached the international advanced level. It has been used for domestic and foreign chemical fiber, thermoelectric, electronics, chemical industry, environmental protection resource recycling and other industries.
 

Picture Name

Working principle:
This machine is a tank body. Steam or heat transfer oil can be introduced into the jacket to heat the inside of the tank. The heat is transferred to the wet material through the inner tank, so that the water in the wet material is gasified. The low-speed motor drives the tank body to rotate, so that the material is continuously turned up and down, inside and outside, and the heating surface is replaced. At the same time, the water vapor is continuously pumped away by the vacuum pump through the vacuum tube, thus speeding up and finally achieved.
Main purpose:
This machine is suitable for dehumidification and drying of heat-sensitive, low-temperature powdery and granular materials in the chemical fiber industry.
Features:

Because it is vacuum drying, it has a higher rate at a lower temperature, which is 2 times higher than the general drying speed, saves energy, and has high heat utilization rate. It is especially suitable for drying heat-sensitive materials and easy oxide materials.
• Closed dry, no leakage, no pollution, suitable for strong stimulation, toxic materials drying.

• The material is mixed and dried in the rotation, and the material can be dried to a very low water content, and the uniformity is good, suitable for different material requirements.

• Compact equipment structure, small footprint, easy to operate, reduce labor intensity and save labor.
Related Notes:
Material: 1 inside and outside (except jacket and support frame A3 steel) all stainless steel. 2. Inner stainless steel, shell A3 paint. 3. Both inside and outside are A3.
Loading coefficient: usually 50%-70% of the total volume, specifically according to the proportion of materials.
• Heat source: steam, heat transfer oil
Working pressure: inner tank: 0.09 ~ 0.096Mpa, jacket ≤ 0.3 Mpa.