News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Emulsion machine manufacturers introduce high shear emulsifier daily maintenance common problems


Release time:

2022-11-22

Emulsion machine manufacturers introduce high shear emulsifier daily maintenance common problems It must be noted that before protection: before using household appliances, the main brake system must be turned off, and the power box must be locked with a handle lock, and appropriate safety signs and safety measures must be carried out.

  Emulsion machine manufacturersIntroduction of high shear emulsifying machine daily maintenance common problems

1. Daily cleaning and sanitation of high-shear emulsifying machine.

2. Daily maintenance of electrical equipment: to ensure the daily cleaning of equipment and electrical control system, and to do a good job of waterproof and anti-corrosion. The variable frequency governor shall have excellent air exhaust and dust removal. If these aspects are not done well, it may have a great impact on electrical equipment, and even burn electrical equipment. It must be noted that before protection: before using household appliances, turn off the main brake system, lock the power box with a handle lock, and carry out appropriate safety signs and safety measures.

乳化机厂家介绍高剪切乳化机的日常维护保养常见问题

3. High-shear emulsifier heating system: The valve should be maintained regularly to prevent rust, jamming and common valve failures, and the drain valve should be maintained regularly to prevent impurities from blocking.

4. Vacuum pump system: In the vacuum pump system, especially in the water ring vacuum pump, the homogeneous emulsion pump sometimes ignites due to corrosion or slag blocking the motor rotor. Therefore, during the daily maintenance period, please confirm whether there is any chatter condition. The water ring system shall be unblocked. When running the mechanical pump in use, if there is a stop, stop the mechanical pump temporarily, clean the mechanical pump, and then restart it.

5, sealing system: high shear emulsifier has a lot of sealing. The machine seal should be replaced with the moving ring and the static ring frequently. The cycle time lies in the frequent use of the machine. The refrigeration system of the two-end machine seal should be maintained regularly to avoid ignition of the machine seal due to common refrigeration failures. According to the characteristics of the plastic, the skeleton seal should be made of appropriate raw materials, and in use according to the maintenance manual regular maintenance.

6. Lubrication: For motors and reducers, the lubricating fluid should be maintained regularly according to the operation guidelines. When the frequent use of high shear emulsifying machine, should be checked in advance of the viscosity and acid value of lubricating oil, and should be removed in advance to replace the grease.

During the period of using the machine and equipment, consumers must send the equipment to the relevant departments for certification on time to ensure the safety of the equipment.

8. If abnormal sound or any problems are found during the operation of the high-shear emulsifier, it should be turned off immediately to carry out safety inspection, and the actual operation can only be carried out after fault detection.

  Emulsion machine manufacturers: How is the high shear emulsifying machine used?

The high-shear emulsifying machine makes the incompatible solid phase and gas chromatography under the joint action of appropriate additives in the corresponding perfect process, evenly and finely disperse the emulsion in an instant, and finally obtain stable and high quality products through high-frequency cycles. By the depth of the interpretation of high shear emulsifying machine is how to use?

The high-shear emulsifying machine causes random event vortex of the liquid in the mixing tank due to the impact change of the double-flow die and the cross-mixing and cutting with the radial flow. High shear emulsifying machine is connected with the motor emulsion head high-speed operation, the raw materials to carry out cutting, dispersion, collision. In that way, the raw materials will become more and more detailed, promoting the integration of water and oil, vapor and liquid, heterogeneous and integrated. High shear emulsifying machine is widely used in skin care products, medicine, food, printing ink biochemical, petrochemical equipment and other commodities to use emulsifying machine.