Home
Vacuum emulsifying machine
Mixing equipment
Polyester device
Products
Case
News
About
Contact

News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Industry News

Company News

Home page

Emulsion machine manufacturers tell you about the installation and debugging of emulsifying machine and the causes of collision sound.

Release time:

2022-10-13

Emulsion machine manufacturers tell you about the installation and debugging of emulsifying machine and the causes of collision sound. installation and commissioning of emulsifying machine: (1) It is very important to check the tightness of the body and whether there is foreign matter. Emulsion machine manufacturers said that for the emulsifier, the seal is equivalent to the role of the sealing ring, in the operation of the equipment to play a sealing role, to avoid leakage.

　 Emulsion machine manufacturersTell everyone about the installation and debugging of the emulsifying machine and the causes of the collision sound.

乳化机厂家跟大家说说乳化机的安装调试及碰撞声产生的原因

installation and commissioning of emulsifying machine:

(1) It is very important to check the tightness of the body and whether there is foreign matter.Emulsion machine manufacturersFor the emulsifying machine, the seal is equivalent to the role of the sealing ring, which plays a sealing role in the operation of the equipment to avoid air leakage. Of course, in addition to checking whether the seal is complete, you also need to know whether there are sundries in the body. Whether it is new equipment that has not been used or old equipment that has been used many times, it cannot be ignored. There may be no material impurities inside the new equipment, but it is very likely that the metal chips missed in the production process of the equipment will definitely affect the work of the equipment if the surface is not cleaned;

(2) Check the power connection. The emulsifier manufacturer said that the emulsifier is a monomer, but it does not exist as a separate unit in the material mixing, but as a combined system. It needs to rely on the motor to provide power, and the cooling machine to provide cooling functions. The linkage between these devices needs to be established on the wiring system, and the power connection is the basic work. If the basic work is not done well, it will also affect the use of the emulsifier, so checking the power connection is an important thing. In addition to checking whether the power switch is normal, check whether the motor and other equipment are damaged during operation.

(3) Cleaning. Why is cleaning installation and debugging work? In fact, it is not difficult to explain. Emulsifying machine manufacturers said that when the emulsifying machine is connected with the pipeline, it is generally necessary to clean the pipeline in the pipeline and make sure that there are no sundries in each pipeline before the next step can be carried out. In the initial stage of use of the high-shear emulsifying machine, installation and debugging can not only reduce equipment failures, but also help to improve emulsifying performance, enhance the use value of equipment users and bring economic benefits to the development of the industry.

Vacuum emulsifying machine running in the collision sound is why?Emulsion machine manufacturerstell us below.

1. If the equipment pressure pulsation is large, the flow is insufficient or no flow, the pipeline has vibration, and the noise is serious, the following factors should be considered: the air in the pump suction room is not purified; the plunger sealing ring used to inhale the air; the suction pipe is too thin and bent, the suction valve spring is broken or the valve core is damaged, the suction valve plug is not tight, and the suction filter of the liquid tank is blocked. The solution is to loosen the air screw of the pump body to discharge the air; take out the drain valve and inject the liquid into the plunger cavity. Replace the suction hose or eliminate the dead angle, replace the spring or replace the valve core; tighten the suction valve plug; clean the suction filter of the liquid tank.

2. If there is a collision sound in the operation of the vacuum emulsifying machine, it may be due to the strengthening of the sleeve gap; There are sundries in the pump body; There is a gap between the plunger bearing seat and the plunger bearing seat. The solution is to replace the shaft sleeve; clean up the ruins; adjust the motor and pump to be coaxial; tighten the compression screw sleeve.

3. The high temperature of the emulsion pump tank may be caused by damage to the bearing bush, insufficient lubricating oil or unqualified lubricating oil. The solution is to refuel or clean the fuel tank, change the oil; repair the crankshaft and replace the bearing bush.