News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Introduction of cosmetic equipment filling machine in the use of matters needing attention

Release time:


1. Because this filling machine is an automatic equipment, the sizes of easy-to-pull bottles, bottle cushions and bottle caps are all required to be consistent.

2. Before starting the filling machine, it is necessary to roll the machine with the rocker handle to observe whether there is any abnormality in its rolling, and it is concluded that it is normal before starting the machine.

3. When adjusting the machine, the tools should be used appropriately. It is forbidden to use too large tools or use too much force to remove parts to avoid damaging the parts or affecting the function of the machine.

4. After the machine is adjusted, the loose screws must be tightened, and the machine can be driven only after rolling with the rocker handle to observe whether its action meets the requirements.

5. It is necessary to keep the machine clean. It is forbidden to have oil stains, liquid medicine or glass chips on the machine to avoid machine corrosion. Therefore, it is necessary:

The machine in the production process, timely eradication of liquid or glass debris.

⑵ Before the shift, each part of the surface of the machine should be cleaned once, and clean smooth oil should be added to each moving part.

(3) It should be wiped once a week, especially the places that are not easy to clean in normal use or blown with compressed air.

Disinfection and flushing of filling machine

1. Loosen the upper and lower set screws, remove the liquid injection system for overall disinfection, or remove them for disinfection and cleaning.

2. Place the liquid inlet pipe in the cleaning liquid and start the machine for cleaning.

3. There may be errors in the practice of filling the 500ml model, and the measuring cylinder shall be used to stop the filling before the formal filling.

4. Needle tube for filling machine, standard 5ml or 10ml syringe for type 10, 20ml glass filler for type 20 and 100ml glass filler for type 100.

Device considerations for filling machines

1. After the machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation for timely processing.

2. Device and condition the feeding and discharging components according to the outline drawing in this statement.

3. Add new smooth oil to each smooth point.

4. Roll the machine with the rocker handle to check whether the machine is working in the correct direction (facing the motor spindle is counterclockwise), and it is necessary to maintain the grounding of the machine.