News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Corresponding Countermeasures for Fire Prevention of Stainless Steel Reaction Kettle

Release time:


In social life, chemical products are indispensable and irreplaceable. Today we mainly come to understandStainless steel reaction kettleThe corresponding countermeasures for fire prevention.Stainless steel reaction kettleThe raw materials, intermediates and even products used in production are flammable, explosive and corrosive substances. Most of the production is completed through chemical reaction and material transportation under severe conditions such as high temperature, low temperature, high pressure, high speed, toxicity and corrosion. The process operation has strong continuity, process pipelines andStainless steel reaction kettleIt is easy to form explosive mixture, and there are many ignition sources in the production area, which has the risk of fire and explosion.

1. put good stainless steel reaction kettle fire design off

The main causes of fire caused by equipment leakage often originate in the design stage, so it is very important to do a good job of fire prevention in the design stage. First of all, the design, selection, material selection, layout and installation of stainless steel reactor should conform to the national norms and standards. Strictly control the design, according to the characteristics of different technological processes, select the corresponding high temperature or low temperature, corrosion resistance, meet the pressure requirements of the material, the use of advanced technology for manufacturing and installation, do a good job of strict fire audit, and through strict commissioning and acceptance.

2. implement the preventive measures for hot work

1. Disassemble and take away. If possible, remove the equipment, pipes and accessories that can be disassembled and taken away from the fire control area, remove them from the main body, move them to a safe place for hot work, and put them back to their original place after the hot work is completed.

2, isolation cover. Effectively isolate the hot work equipment, pipelines and their accessories and related operating systems, such as adding blind plates on the pipelines, adding heads or removing a section of pipes, etc., to isolate flammable and explosive materials and medium gases from entering the hot work site.

3. Clean up the site. Before the fire to clean up the scene, this is the most basic requirements. Before hot work, the inflammable and explosive articles around the hot work point shall be transferred to a safe place, and the site shall be cleaned.

4. Check and confirm. After making relevant preparations, we must check and confirm it. This is very important. After checking and confirming that it is correct, a "hot work safety operation certificate" shall be issued. If you enter the stainless steel reactor for operation, a "safety operation certificate in the equipment" shall be issued to ensure that the person responsible for monitoring shall be properly implemented.