News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Working principle of high-shear vacuum emulsifying machine for liquid powder pulping


Release time:

2019-08-01

Material first in liquid powder beating high shearvacuum emulsifying machineMedium preheating, mixing, and then through the transport pipeline can be directly sucked in the shear state of liquid powder pulping high shear.vacuum emulsifying machineInside. Material in liquid powder pulping high shearvacuum emulsifying machineAfter passing through the PTFE scraper on the mixing in the pot, new interfaces occur continuously, and then through the cutting, shrinking and folding of the frame mixer and the reverse mixing leaves, the mixing and mixing will flow downward.vacuum emulsifying machineAt the homogenizer below the body, the material is cut in the shear seam and quickly broken200nm ~ 2 m particles. Material particle, emulsification mixing, blending and dispersion can be completed in a short time. Because the liquid powder pulping high shearvacuum emulsifying machineThe material is in a high shear state, and the bubbles that occur during the mixing process are pumped away in time. After homogenization, raise the lid and press the pouring button switch to make the liquid powder pulping high shearvacuum emulsifying machineThe inner material is discharged into the outer container of the pot. Liquid powder pulping high shearvacuum emulsifying machineAnd the heating temperature of the water-oil pan is set by the temperature controller on the control panel.; Homogeneous mixing and blade mixing can be used separately. Can also be used together; The length of the homogeneous mixing time is controlled by the user according to the different attributes of the material and can be adjusted through the control panel. At the end of the operation, the spray ball valve can be opened, cleaning liquid powder, pulping and high shear.vacuum emulsifying machine.