News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

What are the cleaning methods of stainless steel emulsifying pot for cosmetics


Release time:

2019-08-01

The emulsifying pot is to shear, disperse and impact the material through the high-speed rotation of the homogenizing head connected to the engine. In this way, the material will become more delicate and promote the melting of oil and water. Widely used in cosmetics, shower gel, sunscreen, and many other cream products are used in the emulsifying pot. Sauce, juice, etc. in the food industry. Ointments in the pharmaceutical industry. Petroleum chemical industry, paint ink, etc. will use the emulsifying pot.
Cleaning method:
1, soak the bottle immersed in a certain concentration, a certain temperature of detergent or caustic soda, using their chemical energy and heat energy to soften, emulsify or dissolve the adhesion on the bottle of unclean material, and sterilization. The immersion time in the immersion process has a great influence on the cleaning effect.
Attention should be paid to the operation of immersion bottle2 points:
When using NaOH to soak the glass container, the maximum concentration of NaOH is 5%, and the temperature is 65 ℃ ~ 75 ℃. Exceeding this temperature and concentration will damage the glass bottle ("burning and peeling" phenomenon may occur);
② When the glass container is immersed in multiple immersion tanks, the temperature difference between the immersion tanks must be below 25°C. If the temperature difference is too large, the glass container may be damaged.
2, spray detergent or water under a certain pressure, through a certain shape of the nozzle
Spraying inside and outside of cosmetic manufacturing equipmentThe chemical and kinetic energy of the detergent is used to remove dirt. When spraying with detergent, if the flow rate of the lotion is too large, the detergent will foam, and the defoamer should be added at this time.
3. Scrub the dirt with a rotary brush. This method is a mechanical method of direct contact with cosmetics manufacturing equipment dirt, decontamination effect is good.
The problem with brushing is:
① It is difficult to realize continuous bottle washing;
② brush encounter oil bottle, will pollute the brush;
③ If the bottle is broken, the bristles of the rotating brush will be cut off, which will cause the brush to fail and pollute other clean bottles;
④ The brush must be replaced frequently.
4. Ultrasonic cleaning For some cosmetic manufacturing equipment with high cleanliness requirements, only the general soaking and spraying method can no longer meet the requirements of full cleaning. Using ultrasonic as a means of cleaning can achieve the purpose of fine cleaning. Ultrasonic cleaning machine is a combination of ultrasonic waves generated by mechanical oscillation and appropriate chemical cleaning.