News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

This paper introduces the equipment composition and working principle of vacuum emulsifying machine


Release time:

2019-07-29

1. Generally, the cooling water of the mechanical seal shall be connected before starting the machine, and the cooling water shall be shut down before stopping the machine. Tap water can be used for cooling water. Cooling water pressure ≦ 0.2Mpa. It is necessary for materials to enter the operation cavity before starting the machine. Moreover, it is necessary to ensure that the machine does not run under the condition of material breakage to prevent idling, which may cause the mechanical seal (machine seal) to burn out due to high temperature or affect the service life. Cooling water inlet and outlet fittings are equipped with hoses with inner diameter of? 5mm. 2. Admit that after the cooling water of the vacuum emulsifying machine is connected, start the motor, and repeatedly require that the motor steering should be in conjunction with the steering sign of the main shaft before operation, and rotation is prohibited! 3, in

1. Generally, the cooling water of the mechanical seal shall be connected before starting the machine, and the cooling water shall be shut down before stopping the machine. Tap water can be used for cooling water. Cooling water pressure ≦ 0.2Mpa. It is necessary for materials to enter the operation cavity before starting the machine. Moreover, it is necessary to ensure that the machine does not run under the condition of material breakage to prevent idling, which may cause the mechanical seal (machine seal) to burn out due to high temperature or affect the service life. Cooling water inlet and outlet fittings are equipped with hoses with inner diameter of? 5mm.

2. Acknowledge the connectionvacuum emulsifying machineAfter the cooling water is sealed, start the motor, and repeatedly require that the motor steering should be in conjunction with the steering mark of the main shaft before operation, and rotation is prohibited.!

When using the machine, it is necessary to input the liquid material successively or insist on a certain amount in the container. The empty machine operation shall be prevented to prevent the equipment from being damaged due to high temperature or crystallization and solidification of materials in the operation. Idling is prohibited!

4. Generally, materials only need to enter TRL1 pipeline equipment through high self-weight. It is necessary to input materials one after another and insist that materials have good fluidity. However, when the fluidity of the material is poor, when the viscosity is ≧ 4000CP, the inlet of SRH pipeline equipment shall be equipped with a delivery pump with a pumping pressure of 0.3Mpa. The choice of pump should be colloid pump (cam rotor pump), its flow and the selected pipeline typevacuum emulsifying machineto match the size of the traffic.(Should be greater than the minimum flow value and less than the maximum flow value)

5, prohibit the metal chips or hard and difficult to break the debris into the operation cavity, to prevent the formation of the operation of the stator, rotor and equipment destructive damage.

6, the equipment in the course of operation in the event of abnormal sound or other problems, should immediately stop inspection, to eliminate the problem before operation. The operation cavity and stator and rotor shall be cleaned after shutdown.