News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

What factors affect the speed of the emulsifying pot


Release time:

2019-07-18

The strength of the shearing effect of the emulsifying pot directly affects the final fineness. Through analysis, it is mainly related to the sharpness of the blade, hardness, rotation stator clearance, relative movement speed of the two cutting edges and the particle size allowed to pass through. Under ordinary conditions, the sharpness of the blade, hardness, rotation stator clearance and the particle size allowed to pass through have been finalized or not to be changed, so the relative movement speed of the cutting edge of the emulsifying pot is the most influential factor, it is shown as the peripheral linear velocity of the rotor. If the linear velocity is high, the density of cutting or impact on the radially active fluid is high, so the thinning effect of the emulsifying pot is strong, and vice versa. But the emulsifying pot line

  Emulsifying potThe strength of the shearing effect directly affects the final fineness. Through analysis, it is mainly related to the sharpness level of the blade, hardness, rotation stator gap, relative movement speed of the two cutting edges and the particle size allowed to pass through. Under normal conditions, the sharpness level, hardness, rotation stator gap and the particle size allowed to pass through have been set or not changed at all, thenEmulsifying potThe relative velocity of the knife edge is the most influential element, shown as the circumferential linear velocity of the rotor, which is high, and the density of cutting or impact on the radially active fluid is high, soEmulsifying potThe refinement effect is strong, and vice versa.

But shouldEmulsifying potThe line speed is not the greater the better, when reaching a very high value, there is a tendency to obstruct the activity, so the fluid becomes very small, and the fever is very high, some materials in turn gather together, so that the consequences are not ideal. From another point of view, the implementation of the room to do experiments is characterized by a small amount, so.Emulsifying potThe physical size of the stator should be complied. The corresponding few words, the diameter must be small, in order to compensate for the negative impact of small diameter on the linear velocity, must progress the angular velocity of the rotor, which constitutes the implementation of the instrument."High speed.

As can be seen from the above,Emulsifying potThe rotational speed is to be considered in conjunction with the amount of practical disposal, but it is based on the existing degree of processing and the economy of production,Below 18.5KW, 3000rpm of a 2-pole motor is often used, while 22KW to 55KW are 1500rpm of a 4-pole motor. If you exceed 75KW, you can think about 1000rpm of a 6-pole motor.