News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Stainless steel reaction kettle pressure control mode


Release time:

2019-07-18

When pressurizing the stainless steel reaction kettle, first open the valve of the gas source, pass the gas to be added to the gas inlet, and then open the gas inlet to pressurize. After pressurization, the operation is opposite, first close the air inlet valve, and then close the air supply valve. 1. Front pressure control: the gas source is connected with a pressure reducing valve, and the pressure of the gas at the output end is controlled by adjusting the pressure reducing valve. 2. Medium pressure control: There is a pressure gauge on the stainless steel reaction kettle. The gas above the target pressure is introduced first, and the pressure is controlled to the set pressure through the exhaust valve. 3. Back pressure control: the exhaust port is connected with a back pressure valve. By adjusting the back pressure valve, the pressure in the kettle is controlled (the air source pressure should be large

GiveStainless steel reaction kettleWhen pressurizing, first open the valve of the gas source, pass the gas to be added to the gas inlet, and then open the gas inlet to pressurize. After pressurization, the operation is opposite, first close the air inlet valve, and then close the air supply valve.

1. Front pressure control: the gas source is connected with a pressure reducing valve, and the pressure of the gas at the output end is controlled by adjusting the pressure reducing valve.

2. Medium voltage control:Stainless steel reaction kettleThere is a pressure gauge, first pass the gas higher than the target pressure, through the exhaust valve, the pressure is controlled to the set pressure.

3. Back pressure control: the exhaust port is connected with a back pressure valve, and the pressure in the kettle is controlled by adjusting the back pressure valve (the air source pressure is greater than the target pressure).

In addition, high pressureStainless steel reaction kettleBefore carrying out the pressurized reaction, it is necessary to replace the air in the kettle more than 3 times with the gas for pressurization, which is a basic operation.