News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

How to install stainless steel storage tank?


Release time:

2019-07-15

At present, the common method of installation and construction of stainless steel storage tanks is the inverted method, but do you know what other methods! 1. The hydraulic lifting device (complete set of equipment) is evenly distributed on the circumference of the inner wall of the storage tank, first lifting the top of the storage tank and the upper layer (the first layer) wall plate of the storage tank body of the storage tank, and then welding the wall plate of the storage tank body of the storage tank layer by layer. 2. A hydraulic hoist composed of a self-locking hydraulic jack, a lifting frame and a lifting rod is adopted. When the hydraulic jack enters oil, the lifting rod and the expansion ring are tightened and lifted by the upper chuck, thus driving the storage tank body (including the storage tank top)

At present, the common method for the installation and construction of stainless steel storage tanks is the inverted method, but do you know what other methods are there?? WeStainless steel storage tank manufacturersLet's get to know!

1. The hydraulic lifting device (complete set of equipment) is evenly distributed on the circumference of the inner wall of the storage tank. The top of the storage tank and the upper layer (the first layer) wall plate of the storage tank body are lifted first, and then the wall plate of the storage tank body is welded layer by layer.

2. A hydraulic hoist composed of a self-locking hydraulic jack, a lifting frame and a lifting rod is adopted. When the hydraulic jack enters oil, the lifting rod and expansion ring are tightened and lifted by its upper chuck, thus driving the storage tank body (including the storage tank top) to lift upward. When the jack returns oil, its upper chuck returns with the piston rod, and its lower chuck automatically clamps the lifting rod and does not slide down, the repeated movement of the jack causes the lifting rod to continuously rise with the tank body of the storage tank until the predetermined height (the height of the next floor is vacated).

3. After butt welding of the next layer of wall plate, open the upper and lower loosening devices of the hydraulic jack, loosen the upper and lower clamps, lower the lifting rod and expansion ring to the lower part of the next layer of wall plate, swell and weld the force transfer rib plate, and then lift. Repeatedly, the tank body of the assembled and welded storage tank is raised until the assembly and welding of the last layer of wall plates is completed, thus completing the installation of the entire tank storage tank.