News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

The strength of the shearing effect of the emulsifying pot directly affects the final fineness


Release time:

2019-07-11

The strength of the shearing effect of the emulsifying pot directly affects the final fineness. Through analysis, it is mainly related to the sharpness of the blade, hardness, rotation stator clearance, relative movement speed of the two cutting edges and the particle size allowed to pass through. Under ordinary conditions, the sharpness of the blade, hardness, rotation stator clearance and the particle size allowed to pass through have been finalized or not to be changed, so the relative movement speed of the cutting edge of the emulsifying pot is the most influential factor, it is shown as the peripheral linear velocity of the rotor. If the linear velocity is high, the density of cutting or impact on the radially active fluid is high, so the thinning effect of the emulsifying pot is strong, and vice versa. But the emulsifying pot line

  Emulsifying potThe strength of the shearing effect directly affects the final fineness. Through analysis, it is mainly related to the sharpness level of the blade, hardness, rotation stator gap, relative movement speed of the two cutting edges and the particle size allowed to pass through. Under normal conditions, the sharpness level, hardness, rotation stator gap and the particle size allowed to pass through have been set or not changed at all, thenEmulsifying potThe relative velocity of the knife edge is the most influential element, shown as the circumferential linear velocity of the rotor, which is high, and the density of cutting or impact on the radially active fluid is high, soEmulsifying potThe refinement effect is strong, and vice versa.

But shouldEmulsifying potThe line speed is not the greater the better, when reaching a very high value, there is a tendency to obstruct the activity, so the fluid becomes very small, and the fever is very high, some materials in turn gather together, so that the consequences are not ideal. From another point of view, the implementation of the room to do experiments is characterized by a small amount, so.Emulsifying potThe physical size of the stator to conform to the corresponding few words, the diameter must be small, in order to compensate for the negative impact of small diameter on the linear velocity, must progress the angular velocity of the rotor, which constitutes the implementation of the instrument"High speed.

As can be seen from the above,Emulsifying potThe rotating speed of the motor is to be considered in combination with the practical disposal amount. However, due to the existing processing degree and production economy, the rotating speed of the 2-pole motor is usually 3000rpm below 18.5KW, while the rotating speed of the 4-pole motor is 1500rpm between 22KW and 55KW, and the rotating speed of the 6-pole motor can be considered beyond 75KW.