News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Homogeneous emulsifying machine working process:


Release time:

2019-07-04

1. Under the action of the centrifugal force generated by the high-speed rotating rotor of the homogenizing emulsifier, the material in the figure is sucked into the working chamber from the axial direction from the upper and lower feeding areas of the working head at the same time. 2. The strong centrifugal force throws the material from the radial direction into the narrow and precise gap between the stator and the rotor. At the same time by centrifugal extrusion, impact and other forces, so that the initial dispersion of emulsification of materials. 3. Generate a linear velocity of at least 15 m/s at the outer end of the high-speed rotating rotor, and the zui height can reach 40 m/s, and form strong mechanical and hydraulic shearing, liquid layer friction, impact and tearing, so that the materials can be fully dispersed, emulsified, homogenized, crushed, and injected through the stator groove at the same time.

1.Homogenizing emulsifying machineUnder the action of the centrifugal force generated by the high-speed rotating rotor, the material in the figure is simultaneously sucked into the working chamber from the axial direction from the upper and lower feeding areas of the working head.
2. The strong centrifugal force throws the material from the radial direction into the narrow and precise gap between the stator and the rotor. At the same time by centrifugal extrusion, impact and other forces, so that the initial dispersion of emulsification of materials.
3. At the outer end of the high-speed rotating rotor, a linear velocity of at least 15 m/s is generated, and the zui height can reach 40 m/s, and strong mechanical and hydraulic shearing, liquid layer friction, impact tearing are formed, so that the materials are fully dispersed, emulsified, homogenized, crushed, and injected through the stator slot at the same time.
4. The material of the homogenizing emulsifier is continuously ejected from the radial direction at high speed, and the flow direction is changed under the resistance of the material itself and the container wall. At the same time, under the action of the upper and lower axial suction forces generated in the rotor area, two strong turning turbulence are formed. After several cycles of materials, zui finally completes the process of dispersion, emulsification and homogenization.