News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Market Prospect Analysis of Homogeneous Emulsifying Pot


Release time:

2019-07-01

The working principle of the homogeneous emulsifying machine is composed of a pair of groups or several groups of high-speed rotating rotors and stators. The high-speed rotating rotors suck materials into the rotor area from the bottom of the container and bear strong mixing and shearing action. The materials are forced to pass through the gap between the precisely matched stator and rotor and then thrown out of the stator hole. In this process, they bear severe shearing action of machinery and liquid, tearing, crushing and destroying the particles, at the same time, the new material is sucked into the center of the rotor, and the pushed material changes direction on the wall of the container, and then enters the rotor area to bear the shearing action, so that the material is completely refined, homogeneous and dispersed, and the best shearing effect is achieved. Prohibited in the absence of liquid flow

HomogenizationEmulsion machineThe working principle is composed of a pair of groups or several groups of high-speed rotating rotors and stators. The high-speed rotating rotors suck materials into the rotor area from the bottom of the container and bear strong mixing and shearing action. The materials are forced to pass through the gap between the precisely matched stator and rotor and then thrown out of the stator hole. In this process, they bear severe shearing action of machinery and liquid, tearing, crushing and destroying the particles. At the same time, new materials are sucked into the center of the rotor, the pushed material changes direction on the wall surface of the container, and then enters the rotor area to bear the shearing action, so that the material is completely refined, homogenized and dispersed, and the best shearing effect is achieved. It is strictly prohibited to operate the equipment before no liquid flows into the body to avoid damage to the mechanical seal. 
 The seat cushion is stable and fixed with anchor bolts. The future operation and maintenance space should be considered during installation. Micro special motor, speed digital display, stepless speed regulation. During the whole installation and construction process, foreign matters are strictly prohibited from entering the high shear area of stator and rotor. 
Experts said that many users choose the original vertical cone mixing equipment in the sea in terms of powder and powder mixing equipment, but experts suggest that because the vertical cone mixer has many shortcomings and high maintenance rate, horizontal mixer should be selected when mixing powder/powder or granular materials. The equipment has high mixing efficiency, good mixing quality, short unloading time and less residue.
This kind of equipment is usually installed at the bottom of the reactor or pipeline, the material enters from the feed port, after high-speed shearing, from the discharge port, can be continuously manipulated, can also be used for cycle reciprocating process.
Development of Mixer Market Vision, HomogenizationEmulsion machineTo speed up the mixer industry, it is necessary to actively promote the establishment and improvement of the technological innovation system with enterprises as the main body, strengthen the integrated innovation ability of enterprises on the basis of digestion and absorption, increase the development effort and capital investment, take innovation as the drive, constantly move closer to improving the advanced technology, and promote the development of the whole hybrid machinery industry, so as to promote the benign cycle of the industry. 
For materials with poor activity, it is recommended to use a pump with a matching flow rate at the feed inlet. Mixer is a machine that uses mechanical force and gravity to mix two or more materials on average. This machine can adjust the mixing host back and forth and up and down on the supporting fixed frame according to the needs of the experiment.
 Under the support of national policy, there is a lot of room for development in China's mixer machinery industry. The mixer machinery industry should seize this historical opportunity, do a good job of digestion and absorption on the basis of re-innovation, and speed up the pace of localization of large hub equipment. Can be suitable for different material viscosity. 
As a Xiangyang industry, the development space of mixer machinery industry is undoubtedly huge. For example, in the pharmaceutical industry, the raw materials of different components are evenly mixed together to form a compound; the contact surface area of the material can also be increased to promote chemical reactions; it can also accelerate physical changes, such as granular solutes added to the solvent, which can accelerate the dissolution and mixing by the action of the mixing machine. Mixers are widely used in various industries and daily life.
During installation, valves with the same diameter as the inlet and outlet of the equipment must be installed at the inlet and outlet ends to control the measurement of material inlet and outlet and to cut off materials when maintaining the equipment. Take another short pillar to connect with the mounting screw hole on the back of the homogeneous host, then string the pillar into the support fixing frame on the upright post, and roll the handle of the support fixing frame to fix the homogeneous host on the upright post.
 According to the motor nameplate access power, homogeneousEmulsifying potAnd have a good grounding device. The method of mechanical external force makes the liquid.-liquid, solid-liquid material particle size narrowing, so that one phase is evenly distributed to another or more phases, to achieve a refined homogeneous, dispersed emulsification effect, so as to form a state of undisturbed emulsion. The pipe at the joint is preferably a metal bellows, which is flexible and easy to position.