Home
Vacuum emulsifying machine
Mixing equipment
Polyester device
Products
Case
News
About
Contact

News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Industry News

Company News

Home page

Dry goods! Emulsifying machine you need to take care of it like this!

Release time:

2019-06-04

As a commonly used equipment in cosmetics, pharmaceuticals, food and chemical production, emulsifying machine is a large production input among production equipment. In order to ensure the economic benefits of vacuum emulsifying machine equipment, you must learn to take good care of it. If you are "good" to it, then it can also bring you high efficiency and high quality. At the same time, the correct and standardized "cherish" emulsifying equipment can give you stable production, at the same time, it can also ensure that the equipment is "not old" and durable. So how can we do a good care of the vacuum emulsifying machine? Let's take a look at the maintenance and maintenance of the emulsifying machine. 1, cleaning work as milk

1, cleaning work as a daily maintenance work of the emulsifier is a regular and very important work. If the regular cleaning is not in place, it is easy to cause damage to the spare accessories of the vacuum emulsifier, or malfunction.

2. Maintenance of electrical equipment: it is necessary to ensure that the equipment and electrical control system are clean and hygienic, do a good job of moisture-proof and anti-corrosion, and the frequency converter should do a good job of ventilation, dust removal and other heat dissipation. If this aspect is not done well, it may have a great impact on electrical equipment and even burn out electrical equipment. (Note: Before electrical maintenance, turn off the main switch, lock the electrical box with a padlock, and do a good job of safety signs and safety protection).

3, heating system: the safety valve should remember to check regularly to prevent the valve from rusting and causing the failure of the connection. The trap should be checked regularly to prevent the blockage of debris.

4. Vacuum system: The vacuum system, especially the water ring vacuum pump, sometimes burns the motor due to rust or debris during use. Therefore, check whether there is a blockage during daily maintenance. The water ring system must be unblocked. If the vacuum pump is blocked during use, stop the vacuum pump immediately and start it again after cleaning the vacuum pump.

5. Sealing system: Emulsifying machine has many seals. Mechanical seals should be replaced with dynamic and static rings regularly. The cycle depends on the frequent use of equipment. Double-end mechanical seals should always check the cooling system to avoid cooling failure and burn the mechanical seals. The skeleton seal should be made of appropriate materials according to the characteristics of the materials and replaced regularly according to the maintenance manual during use.

6. Lubrication: For motors and reducers, replace lubricating grease regularly according to the user manual. For frequent use, check the viscosity and acidity of lubricating grease in advance, and replace lubricating oil in advance.

7. During the use of the equipment, the user must regularly send the instruments and meters to the relevant departments for verification to ensure the safety of the equipment.

8. If abnormal sound or other faults occur during the operation of the emulsifier, it should be stopped immediately for inspection, and then run after troubleshooting.

The above is a common vacuum emulsifying machine maintenance of several key points, if you have problems on the emulsifying machine equipment, welcome to contact the advisory!