News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Key points of operation of mobile pneumatic lifting homogenizing emulsifier


Release time:

2019-05-14

The mobile pneumatic lifting homogenizer makes full use of the high-speed rotation of the homogenizing head connected with the engine to make the material melt and become more delicate. The material is continuously ejected from the radial direction at high speed, and the flow direction is changed under the resistance of the material itself and the container wall. Together with this, under the effect of the upper and lower axial suction forces occurring in the rotor area, two intense turning turbulence are formed. Material through several cycles, the end of the end of the slack, emulsification, homogenization process. The use method of the mobile pneumatic lifting homogenizer: 1. Loosen the oil adding screw of the manual hydraulic cylinder and tighten the beginning screw when working. 2. Press the handle to move

The mobile pneumatic lifting homogenizer makes full use of the high-speed rotation of the homogenizing head connected with the engine to make the material melt and become more delicate. The material is continuously ejected from the radial direction at high speed, and the flow direction is changed under the resistance of the material itself and the container wall. Together with this, under the effect of the upper and lower axial suction forces occurring in the rotor area, two intense turning turbulence are formed. Material through several cycles, the end of the end of the slack, emulsification, homogenization process.
The use of mobile pneumatic lift homogenizer:
1. Loosen the oil filling screw of the manual hydraulic cylinder and tighten the opening screw.
2. Press the handle to adjust the power head to the required working position, which should generally be 2-3 times higher than the diameter of the power head at the bottom of the container.
3. Select and install the standard stator head according to the material and operation requirements of the processed fluid, and adjust the optimal working position of the downward thrust blade on the rotating shaft at the same time.
4, after the end of the mixing, and then press the handle, so that the power head in the highest position, easy to take out the liquid container. To lower the power head, loosen the switch screw.
Notes for mobile pneumatic lift homogenizer:
1. When the power is connected, the steering of the power head should be consistent with the direction of the arrow.
2, often check the amount of oil in the hydraulic cylinder, insufficient or too long should be timely refueling or replacement.
3, the replacement of the standard stator head should be cleaned in time to facilitate the next use.