News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Cosmetic equipment vacuum emulsifying machine selection has the following three steps


Release time:

2019-05-06

First of all, you can first conduct small and pilot experiments to obtain positive solution data. If you are ready to develop a new product, first in the laboratory, through the cosmetic vacuum emulsifying machine to obtain the correct data, so that it can be very good to avoid the occurrence of selection errors, but also through the pilot emulsification equipment for pilot testing, reduce the risk of production investment. The data obtained by the experiment will be the key to the selection of equipment. The key to the dispersion effect of the cosmetic vacuum emulsifying machine is the rate at which the material reaches the shear area and the mechanical energy transmitted to the material. Only the peripheral speed of the rotor can be quantified here.

First of all, you can first conduct small and pilot experiments to obtain positive solution data. If you are ready to develop a new product, first in the laboratory, through the cosmetic vacuum emulsifying machine to obtain the correct data, so that it can be very good to avoid the occurrence of selection errors, but also through the pilot emulsification equipment for pilot testing, reduce the risk of production investment.
 
The data obtained from the experiment will be the key to equipment selection. The key to the dispersion effect of cosmetic vacuum emulsifying machine is according to the rate at which the material reaches the shearing area and the mechanical energy transmitted to the material. Only the circumferential speed of the rotor can be quantified here. In the laboratory, the outlet speed can be calculated according to the equipment speed under the ideal state of the material, thus a suitable range can be selected in the industrial type.
 
Then, determine the problem of the processing capacity of the cosmetic vacuum emulsifying machine. In the industrial equipment selection table provides a reference to water as the standard treatment capacity, in the actual selection to consider the viscosity of the material, specific gravity, solid content, thixotropy and other factors, and the viscosity of the range and thixotropy is difficult to define, so the actual amount of treatment often difficult to grasp the situation. This requires a good technical exchange with engineers and a close-to-fact selection scheme based on effective data and experience.
 
Finally, pay attention to the selection points of cosmetic vacuum emulsifying machine: absorb the required results and determine the adopted process;; Select the type according to the data obtained from the laboratory; List the foreseeable working conditions, such as flammable and explosive, pressure resistant, vacuum pumping, corrosion resistant, and high temperature, etc., and require the cosmetic vacuum emulsifying machine to adapt to the special requirements of working conditions and surface treatment; Under the circumstances of many unpredictable factors and complicated processes, it is proposed to adopt a conservative selection method.