News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

What should be paid attention to when operating the homogenization function of the vacuum homogenization emulsifier


Release time:

2019-03-25

Vacuum homogenizing emulsifier homogenizer, also called homogenizing head and emulsifying head, is the most important core component of vacuum emulsifying machine. The homogenizer of the vacuum homogenizer is composed of a pair of rotor and stator that fit each other. The material is subjected to strong high-frequency secondary shearing action in the high-speed rotating stator and rotor to achieve ultra-fine homogenization of the material particles, and the minimum particle size can reach 0.2-200um. The specifications of the stator and rotor of different materials are different, which can be selected according to the processing technology of the materials. So in the operation of the homogenization function of the vacuum homogenization emulsifier need to pay attention to what? 1, adjust the time relay

Vacuum homogenizing emulsifier homogenizer, also called homogenizing head and emulsifying head, is the most important core component of vacuum emulsifying machine. The homogenizer of the vacuum homogenizer is composed of a pair of rotor and stator that fit each other. The material is subjected to strong high-frequency secondary shearing action in the high-speed rotating stator and rotor to achieve ultra-fine homogenization of the material particles, and the minimum particle size can reach 0.2-200um. The specifications of the stator and rotor of different materials are different, which can be selected according to the processing technology of the materials.

So what do you need to pay attention to when operating the homogenization function of the vacuum homogenization emulsifier?

1. Adjust the time relay to the required working time, and press the homogenizer start button.

2. Homogeneous cutting and scraper stirring of vacuum homogenizing emulsifier: after feeding (water can be used instead during debugging), the corresponding control switches are turned on to control the operation of homogenizer and scraper stirring.

3, mixing before starting should also be inching, check the mixing scraping wall is abnormal, if there should be immediately ruled out.

4, vacuum homogenization emulsifier pay attention to keep the homogenizer clean. If the material is stopped or needs to be replaced, the part of the homogenizer in contact with the working fluid should be cleaned as required, especially the cutting wheel cutting sleeve of the head, the sliding bearing and the shaft sleeve in the homogeneous shaft sleeve. After cleaning and reassembling, the hand-turned impeller shall be free of jamming. After the two flanges of the pot body and the pot cover are relatively fixed, the inching homogenizer motor can turn correctly and start operation without other abnormalities.

5, homogeneous cutting head due to the high speed, not in the empty state of operation, so as not to affect the degree of sealing after local heating.

6. The homogenizer of the vacuum homogenizer is reversed from top to bottom. After the motor is wired or not to be restarted for a long time, it should be inching and tested. The rotation of the mixing frame is reversed from top to bottom, and the mixing blade is reversed from top to bottom.

7. During debugging, the homogenizer shall be operated after inching and stirring for trial rotation, and then the homogenizer shall be operated after confirmation.