News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Tips for operating the vacuum homogenizing emulsifying machine of cosmetic equipment


Release time:

2019-03-25

Manufacturers can choose cosmetic equipment-vacuum emulsifying machine according to the processing technology of materials. For example, the homogenizer of the vacuum emulsifier can process different materials according to the different specifications of the rotor and the stator to achieve fine homogenization of the material particles, and the particle size can reach 0.2-200um. It can be said that the homogenizer is a very important part of the vacuum emulsifying machine. In the operation of the vacuum emulsifier, we need to pay more attention to ensure the reasonable and stable operation of the equipment. Tips for operating the vacuum homogenizing emulsifying machine of cosmetic equipment: 1. The homogenizing cutting head shall not operate in the empty pan state due to its extremely high speed,

Manufacturers can choose cosmetic equipment-vacuum emulsifying machine according to the processing technology of materials. For example, the homogenizer of the vacuum emulsifier can process different materials according to the different specifications of the rotor and the stator to achieve fine homogenization of the material particles, and the particle size can reach 0.2-200um. It can be said that the homogenizer is a very important part of the vacuum emulsifying machine. In the operation of the vacuum emulsifier, we need to pay more attention to ensure the reasonable and stable operation of the equipment.
Operation of cosmetic equipment vacuum homogenization emulsifying machine tips:
1, homogeneous cutting head due to the high speed, not in the empty state of operation, so as not to affect the degree of sealing after local heating.
2. The homogenizer of the vacuum emulsifier is reversed from top to bottom. After the motor is wired or not to be restarted for a long time, it should be inching and tested. The turning of the mixing frame is reversed from top to bottom, and the mixing blade is reversed from top to bottom.
3. Homogeneous cutting and scraper stirring of vacuum emulsifier: after feeding (water can be used instead during debugging), the corresponding control switches are turned on to control the operation of homogenizer and scraper stirring.
4, vacuum emulsifying machine pay attention to keep the homogenizer clean. If the material is stopped or needs to be replaced, the part of the homogenizer in contact with the working fluid should be cleaned as required, especially the cutting wheel cutting sleeve of the head, the sliding bearing and the shaft sleeve in the homogeneous shaft sleeve. After cleaning and reassembling, the hand-turned impeller shall be free of jamming. After the two flanges of the pot body and the pot cover are relatively fixed, the inching homogenizer motor can turn correctly and start operation without other abnormalities.
5. During debugging, the homogenizer shall be operated after inching and stirring for trial rotation, and then the homogenizer shall be operated after confirmation.