News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Four Jacket Structures of Cosmetic Equipment Vacuum Homogenizing Emulsion Machine


Release time:

2019-03-19

On the outside of the tank body of the vacuum homogenizing emulsifier, steel structures of various shapes are installed by welding connection or flange connection to form a closed space with the outer surface of the tank body of the vacuum homogenizing emulsifier. Hot fluid is introduced into this space to heat or cool the material and maintain the temperature of the material within a predetermined range. This steel structure is collectively referred to as a jacket. The form of jacket can be divided into many kinds, and the vacuum homogenization emulsifier usually adopts the form of jacket as a whole jacket. The overall jacket is a container with a slightly larger diameter on the outside of the vacuum homogenizing emulsifying machine tank. This jacket is simple and convenient, and basically does not require maintenance. The disadvantage is heat exchange

On the outside of the tank body of the vacuum homogenizing emulsifier, steel structures of various shapes are installed by welding connection or flange connection to form a closed space with the outer surface of the tank body of the vacuum homogenizing emulsifier. Hot fluid is introduced into this space to heat or cool the material and maintain the temperature of the material within a predetermined range. This steel structure is collectively referred to as a jacket. The form of jacket can be divided into many kinds, and the vacuum homogenization emulsifier usually adopts the form of jacket as a whole jacket.
The overall jacket is a container with a slightly larger diameter on the outside of the vacuum homogenizing emulsifying machine tank. This jacket is simple and convenient, and basically does not require maintenance. The disadvantage is that the heat exchange area is limited by the geometry of the tank body of the vacuum homogenizing emulsifier and cannot be made too large.
The structure of the overall jacket can be divided into four structures according to the degree of covering the tank body of the vacuum homogenizing emulsifier:
A part of the 1. vacuum homogenizing emulsifier is jacketed, which is used in occasions where the heating area is not large.
A certain part of the 2. vacuum homogeneous emulsifying machine and the lower head are jacketed, which is a typical structure commonly used in vacuum homogeneous emulsifying machines.
3. in order to reduce the external pressure calculation length of the tank body of the vacuum homogeneous emulsifying machine (when the wall thickness of the tank body is calculated according to the external) or to realize the heating and cooling of the tank body in the axial direction of the vacuum homogeneous emulsifying machine, a reinforcing ring is arranged between each section or a jacket sealing member that can play the role of a reinforcing ring is used. This structure is generally not used on the tank body of the vacuum emulsifying machine, instead, it is used in occasions where the tank is slender.
The 4. is a fully coated jacket, which has the largest heat exchange area compared with the first three types of jackets. But the general vacuum homogenization emulsifier does not use this as a jacket.