News Center

The company has established the enterprise goal of "survival by quality, reputation by quality, and development by quality. Strengthen the training of technical personnel, and constantly enrich the first-line technical force to ensure the normal operation of the quality assurance system.

Three major use of stainless steel reactor operating specifications


Release time:

2019-03-19

Today, stainless steel reaction kettle manufacturers introduce the operation problems of stainless steel reaction kettle. Standards and specifications must be required so that it can be more convenient to use. The following are the relevant operation specifications for stainless steel reaction kettle: 1. Before starting the stainless steel reaction kettle A, check whether the kettle, stirrer, rotating part, auxiliary equipment, indicating instruments, safety valves, pipelines and valves meet the safety requirements. B. Check whether water, electricity and gas meet the safety requirements. 2. When the stainless steel reaction kettle is in operation A, the stirrer of the reaction kettle should be turned on before feeding. When there is no noise and it is normal, the material should be added to the reaction kettle, and the feeding quantity should not exceed

TodayNo.stainless steel reaction kettleManufacturers to introduce the operation of stainless steel reaction kettle, must be standard and specification, so as to use more convenient, the following is the stainless steel reaction kettle related operating specifications:
1. Stainless steel reaction kettle before driving
A, check the kettle, agitator, rotating parts, ancillary equipment, indicating instruments, safety valves, pipelines and valves are in line with safety requirements.
B. Check whether water, electricity and gas meet the safety requirements.
2. Stainless steel reaction kettle in driving
A. Before feeding, the agitator of the reaction kettle should be opened first. When there is no noise and normal, the material should be added to the reaction kettle, and the feeding quantity should not exceed the process requirements.
B. Before opening the steam valve, first open the return valve and then open the intake valve. Open the steam valve slowly to preheat the jacket and gradually increase the pressure. The pressure in the jacket is not allowed to exceed the specified value.
C, steam valve and cooling valve can not be started at the same time, steam pipe is not allowed to hammer and collision when passing gas.
D. When opening the cooling water valve, first open the return valve and then open the inlet valve. The cooling water pressure shall not be lower than 0.1 MPa and shall not be higher than 0.2 MPa.
E, water ring vacuum pump, to start the pump before water supply, stop the pump, stop the pump first after water, and should be removed from the pump water.
F, at any time to check the operation of the reaction kettle, found abnormal should stop maintenance.
D, cleaning titanium epoxy (enamel) reaction kettle, not allowed to use alkaline water brush reaction kettle, be careful not to damage the enamel.
3. Stainless steel reaction kettle after parking
A, stop stirring, cut off the power supply, close various valves.
B, shoveling pot must cut off the power supply of the mixer, hang a warning sign, and set up a person to monitor.
C, stainless steel reaction kettle must be in accordance with the requirements of the pressure vessel for regular technical inspection, inspection is not qualified, shall not run.
The above is the stainless steel mixing tank manufacturers to introduce the use of stainless steel reactor operation specifications, please use according to the standard