+
  • 转鼓干燥(增粘)设备.jpg

Drum drying (viscosified) equipment

Working principle: This machine is a tank body. Steam or heat transfer oil can be introduced into the jacket to heat the inside of the tank. The heat is transferred to the wet material through the inner tank, so that the water in the wet material is gasified. The low-speed motor drives the tank body to rotate. The material is continuously turned up and down, inside and outside, and the heating surface is replaced. At the same time, the water vapor is continuously pumped away by the vacuum pump through the vacuum pipe, thus speeding up and the material drying tube.

Picture Name

Hotline:

Product Description

※ working principle ※
 
 

This machine is a tank body. Steam or heat transfer oil can be introduced into the jacket to heat the inside of the tank. The heat is transferred to the wet material through the inner tank, so that the water in the wet material is gasified. The low-speed motor drives the tank body to rotate. The material is continuously turned up and down, inside and outside, and the heating surface is replaced. At the same time, the water vapor is continuously pumped away by the vacuum pump through the vacuum pipe, thus speeding up and the material drying tube.

   

Features


◆ Closed dry, no leakage, no pollution, suitable for strong stimulation, harmful toxic materials drying;
◆ Because it is vacuum drying, it has a higher rate at a lower temperature, which is 2 times higher than the general drying speed, saves energy and has high heat utilization rate, and is especially suitable for drying heat-sensitive materials and easy oxide materials;
◆ The material is mixed and dried in the rotation, and the material can be dried to a very low water content, and the uniformity is good, which is suitable for different material requirements;
The equipment has compact structure, small footprint, easy operation, reduce labor intensity and save labor.

 

Product advantages


The equipment has high energy utilization rate and obvious energy saving effect. In order to save energy consumption and reduce cost, the equipment adopts heating drum design, which can effectively gasify and dry all the moisture in wet materials, and is efficient and intelligent.

 

※ main purpose ※


This machine is suitable for dehumidification and drying of heat-sensitive, low-temperature powdery and granular materials in the chemical fiber industry.

 

 
 

 

Related Products

Product Message

Security verification
Submission